After a storm, safety comes first: keep away from pool equipment if there is standing water or damage around it. Then clear debris, have the pump, filter and electrical equipment checked before turning it back on, and rebalance the water fast, before it turns green.
Call or text Steven: (832) 447-4236
Spring, The Woodlands and Conroe get heavy storms, and every so often a hurricane or tropical storm. We clean up and repair pools after all of them. This guide covers what to do in the days after. For getting ready before storm season, see our storm preparation tips.
Step 1: Safety Check
- Electrical. If water covered the equipment pad or wiring is damaged, don’t touch it. Leave the breaker off and have it inspected.
- Fallen trees and fences. Keep kids and pets away from the pool until gates and fences are secure again.
- Murky water. Don’t swim in water you can’t see the bottom of.
Step 2: Get Debris Out
Skim leaves and branches off the surface and empty the skimmer and pump baskets before running the pump. Large debris on the floor should come out by hand or net before vacuuming, so it doesn’t clog the pump or the vacuum line.
Debris Removal
Leaves and branches come out before the pump runs.
After a Storm
Rain and debris can turn a pool cloudy green within days.
Step 3: Check the Equipment
Equipment that sat in floodwater should be inspected before it’s turned on. We check pumps, motors, heaters, automation and lights, and repair or replace what was damaged. See our pool repair in Spring and pool light repair pages.
Step 4: Water Level and Chemistry
- Water level. If the pool overflowed, lower it back to the middle of the skimmer. Never drain it completely.
- Test the water. Rain dilutes chlorine and throws off pH. Test and rebalance before algae starts.
- Shock if needed. Organic debris uses up chlorine fast, so storm water usually needs a shock.
- Filter continuously until the water is clear, cleaning the filter as it loads up.
If the Pool Has Already Turned Green
A pool left for a few days after a storm can turn green. That’s fixable. Our green-to-clean service in Spring handles it, and our algae removal guide explains what’s involved.
Where Storm Damage Hides
- Cracked skimmer lids or baskets from falling branches.
- Debris jammed in the pump impeller, which reduces flow.
- Torn filter cartridges or DE grids from a heavy debris load.
- Pool lights with failed seals after flooding.
- Automation that lost its schedule in a power outage.
Our weekly service customers get a post-storm check as part of their visit. See our pool service in Spring, TX.
Common Questions
What should I do with my pool after a storm in Spring, TX?
Stay safe first: keep away from equipment if there is standing water or damage near it. Then remove debris, check the pump, filter and electrical equipment, test and rebalance the water, and run the filter until it’s clear.
Should I drain my pool after a heavy rain?
No. Lower the water level only if it’s overflowing, and never drain the pool completely. An empty pool can be damaged, especially in wet ground.
Can floodwater damage pool equipment?
Yes. Pumps, motors, heaters and automation that sat underwater can be damaged. Don’t turn flooded equipment back on until it has been checked.
Why did my pool turn green after the storm?
Rain dilutes chlorine and washes in dirt, leaves and other organic material, which uses up the remaining chlorine. Shock, filter and rebalance quickly to stop it.
Do you help with pool cleanup after hurricanes and storms?
Yes. We do storm cleanup, equipment checks and repairs, and green-to-clean recovery in Spring, The Woodlands and Conroe.
Owner-operated from E Benders Landing Blvd, 4.9 stars across 135+ Google reviews, no contracts. See our pool service in Spring, TX or request a free quote.
Call or text Steven: (832) 447-4236